Build Completion Cleaning Zetland — Handover-Ready Finishes for 2017 New Builds
Zetland NSW 2017 has been under continuous construction for a decade, and build completion cleaning is the trade that decides whether a brand new apartment presents like one. Between the Joynton Avenue towers, the residential blocks ringing Green Square town centre and the ground-floor commercial tenancies below them, there is a steady pipeline of spaces reaching practical completion every month. Pro Clean Corp services Zetland 2017 and surrounds with builders cleaning crews who arrive after the last trade and leave a space that survives a defect inspection.
The two-stage handover clean we run in Zetland
Doing a builders clean as a single visit is how developers end up paying twice. We split it, because in a Zetland tower there is almost always one more trade coming back.
- Stage one — rough clean. Bulk debris removal, offcuts and packaging out, dust suppression through ceiling voids and cornices, vacuuming of subfloor and window tracks, removal of floor protection and tape residue.
- Stage two — detail or sparkle clean. Glass and mirrors cut back to a streak-free finish, tile grout haze removed, silicone lines trimmed and wiped, paint specks lifted off skirtings and architraves, tapware and appliance film stripped, all stickers and barcodes removed.
- Balcony tiles and balustrade glass washed down — Zetland balconies collect construction dust off neighbouring sites long after your own scaffold is down.
- Kitchen and bathroom joinery wiped inside and out, including drawer runners and under-sink cavities where plumbers leave swarf.
- Final floor treatment appropriate to the substrate — timber, tile or carpet — and a written handover checklist per unit.
Why new-build cleaning in Zetland is its own problem
The density here changes the job. Loading dock windows are narrow, service lifts are shared across multiple trades, and most Joynton Avenue and Gadigal Avenue buildings restrict noisy work to set hours because half the tower is already occupied. A crew that has not worked a Green Square handover before loses a full day to logistics alone. We book dock times in advance, work off the site induction, and keep waste out of resident bin rooms.
There is also the dust problem. Zetland has had multiple concurrent construction sites for years, so a unit cleaned to a perfect finish on Monday can carry a visible film again by Thursday if the windows were left open. We schedule the detail clean as close to inspection as the program allows, and we seal the unit when we leave.
Who books this service
Builders and project managers running residential handovers make up most of the work, but we are also engaged by owners taking delivery of an off-the-plan apartment who want an independent clean before they sign off the defect list, and by commercial tenants fitting out retail space at street level near East Village. Fit-out completion for a shop or a clinic follows the same two-stage logic, then rolls straight into an ongoing program — see retail cleaning in Zetland or medical cleaning for what that looks like.
For strata managers taking over a completed building, the handover clean is the baseline that the ongoing common-area contract is measured against. We frequently do both, which means the same supervisor who signed off the builders clean owns the strata cleaning program afterwards.
What it costs and how we quote it
Build completion work is priced per project. The labour component sits around $45 to $60 per hour because of the detail, with a typical one-bedroom Zetland apartment landing near $450 and a large three-bedroom with extensive glazing closer to $900. Volume across a floor or a full release brings the per-unit rate down considerably. Everything is fixed in writing before we start — the method is set out on our Zetland cleaning cost guide and the tier inclusions on our rates page. If your project spans the boundary we also cover Green Square and Rosebery on the same rate card.
Backed by a full-service operation
Handover cleaning is a specialist slice of what we do. The same business runs commercial cleaning teams across Sydney, which is why we can surge six or eight cleaners onto a Zetland tower at short notice rather than turning the job down. Insurance, inductions and SWMS documentation are all in place before the first crew badges in.
Build completion cleaning Zetland — FAQs
What is build completion cleaning?
Build completion cleaning is the final trade clean that happens after construction finishes and before handover or occupation certificate inspection. In Zetland it usually means removing render splatter, silicone smears, protective film, plaster dust and adhesive residue from a brand new apartment or commercial tenancy so the space presents as sold.
How is it different from a normal commercial clean?
A routine clean maintains a space that is already finished. A build completion clean is a one-off detail job on surfaces that have never been cleaned — window tracks packed with dust, tile grout haze, paint specks on skirting, and stickers on every appliance and tap. It takes far longer per square metre and needs different equipment.
How much does builders cleaning cost in Zetland?
Build completion work is quoted per project rather than per hour, but the labour component sits around $45 to $60 per hour because of the detail involved. A single new apartment typically lands between $450 and $900 depending on size, glazing and how much protection was left in place during the fit-out.
Do you do the two-stage builders clean?
Yes. Stage one is the rough clean once trades are off site — bulk debris, dust suppression and floor protection removal. Stage two is the detail or sparkle clean immediately before inspection. Splitting it this way stops late trades from undoing finished work.
Can you clean a whole floor or tower at once?
Yes. We scale crews to the handover schedule rather than the calendar, so a developer releasing twenty apartments across a Joynton Avenue tower gets them staged floor by floor to match the settlement dates.
What happens if the inspector flags something?
We re-attend at no charge for anything on our scope that is picked up at defect inspection, provided the space has not been re-entered by other trades. Practical completion in Zetland is tight on timing and we plan for one contingency visit.
Handover coming up? Get a fixed build completion quote for your Zetland project
Request a Free Quote